category like '1234567' Scope Mount Installation Prices | New England Custom Gun Service, Ltd.
New England Custom
Gun Service, Ltd.


741 Main Street Claremont, NH
Call Us At 603-287-4836

<< Back to Homepage
Fine Guns - Accessories - Sights           
Mounts - Gunsmithing      
Search Products & Accessories

Home > Scope Mount Installation Prices

Scope Mount Installation Prices
 
Thank you for your inquiry into our sights and services. Please note that in general we do not make our sights to fit a specific barrel contour or make of rifle barrel. Our sights are designed to be fit to the individual barrel to achieve the best results.

If you are ordering sights, please check with your gunsmith for help in determining the right components to suit your needs.

Below is an outline of our sight installation for the purpose of providing you with a price estimate only. We will give you a firm written quotation once the gun is visually inspected.

Front Sights'
Please note that all "Screw on" or "Press Fit" sights will be prepared and blued to match the guns finish. All "Solder On" ramps will require re-bluing*. All ramps will be supplied with a Silver bead unless otherwise specified.
Additional costs will be applied for other inserts.

Sight Insert Upgrades
On the Masterpiece Banded Ramp and Classic Ramp with Folding Hood you have the option to upgrade the front sight insert from the silver bead.


Rear Sights
All prices listed are for the rear sights and their installation. Range testing and regulation of the sights is additional and charged by time and ammunition used.


Metal Finish
* The re-bluing of the barrel(s) or barreled action will be done based on the firearm and the process needed to re-blue.

(Please note that the prices quoted are for re-finishing the barrel after sight installation only. We would need to quote separately on a complete polish and re-finish of all metal if required.)

Regulation of the Rear Sights
(Ammunition will be charged per rounds used or by the box depending on the final quote.)


Scope Mounts  

EAW Lever-Loc and Specialty Mounts
 

***Magnum Mounting installation:
Open front base and receiver holes to 8-40, fit Weaver head Torx screws to front and rear base, 271 Loctite on base screws and 3M “Scotchkote” in both rings. Range testing will also be done and ammunition will be billed by the rounds fired.

Before packaging the gun and scope for shipment to us we ask that you do the following:
You hold the gun in a comfortable shooting position.

Have another person hold the scope, you wish to have mounted, over the gun. (If a variable powered scope please be certain that the scope is set on its highest magnification as this is the critical setting for eye relief.) Have them move the scope back and forth over the gun until you achieve the proper eye relief.

At this point, have the person mark the barrel of the gun with a piece of masking tape so that the back edge of the tape lines up with the front end of the scope. This will give us a reference point. When the gun and scope arrive we will align the scope with the tape and select the proper mounting components to achieve the best possible mounting solution.

 

New England Custom Gun, Ltd.     741 Main Street     Claremont, NH 03743
Phone: (603) 287-4836     Fax: (603) 287-4832      E-Mail:
 info@necgltd.com

New England Custom Gun Service, Ltd. specializes in top quality gunmaking, gunsmithing and firearm restoration services to the sporting arms community, as well as high quality long arms, optics and gun components. Our shotgun line includes AyA shotguns, as well as drillings and combination guns from Germany by such makers as Merkel, and Krieghoff. Big bore guns, such as double rifles from Krieghoff, are available as well as bolt action rifles from these and other makers, including Prechtl, Blaser, Dakota, and Sauer. Although not extensive, our used guns list is definitely worth checking if you are in seach of the occasional gem. We also carry the rifle scopes of Schmidt & Bender, a high quality line of German hunting scopes that includes a complete series of Police Marksman long-range tactical sniper scopes. Both series are available with illuminated reticles. Our extensive gun components and gunsmithing tools list features a large assortment of scope mounts by EAW Recknagel, quality gun sights and gun accessories, including express sights by Recknagel, as well as our newly developed receiver sights, the NECG Peep Sight for Ruger Rifles, Weaver Bases, Grooved 22 and now the CZ Peep. You'll find a lot of knowledge at NECG. Please browse through all we have to offer. Then let us know how we can be of service!

NECG now imports RWS Ammunition from Germany in hard to find Metric ammunition as well as offering lead free bullet options in American calibers. NECG offers Ghost Ring Peep sights for the CZ 527 and CZ 550 and a RUGER Ghost Ring peep sight for Ruger firearms with integral scope bases. NECG is also a place to book your next African plains game hunt to the Eastern Cape of South Africa.

Refunds: A refund for the purchase price of the item, purchased directly from NECG, is possible by returning the unused item directly to us.