New England Custom
Gun Service, Ltd.

741 Main Street
Claremont, NH 03743
Call us at 603-287-4836

<< Back to Homepage
Fine Guns - Accessories - Sights           
Mounts - Gunsmithing      
Search Products & Accessories
My Shopping Bag
My Cart  $ 0.00  
My Account

Home > Services Offered By New England Custom Guns

NECG Gunsmithing Services Price List

Since each gunsmithing job tends to be unique we will only provide written quotations after the physical inspection of the rifle or shotgun requiring service. The base prices listed below are for services which are relatively straight forward but we do reserve the right to modify a quote after an inspection has been done in the event something unexpected is present.

GENERAL SERVICES WORK:

Strip, Clean and Oil with Inspection $150
Stock Fitting (In Shop Only) $150
Stock Fitting with Live fire at pattern board * From $225
Furnish and Fit NECG Universal Recoil Pad $125
Furnish and Fit NECG Quick-Mount Pad (Sporting) $135
Add spacers to lengthen pull Additional From $100
Leather Covered Recoil Pad From $425
Stock refinishing with Oil finish and re-cut checkering From $675
Range Testing* $ 75
*Ammunition to be invoiced by rounds fired or by the box

RIFLE WORK:

Accurizing* From $225
Glass Bed Action only From $150
Glass Bed Action and Adjust Forend pressure. From $225
Pillar Bed (Synthetic Stocks Only) From $225
Fit and Bed Synthetic Stocks (No Painting) From $525
Chamber and Bore Cast to determine caliber. $75
Cut and Crown barrel (No bluing) From $150
Double Rifle Regulation* Up to $500
Install 3 -Position Safety (Labor Only) $150
Furnish and Fit Buehler Style Safety to Mauser shroud $100
Fit Recknagel, Blackburn or Timney trigger (Labor Only) $75
Furnish and Fit new bolt handle. $225
Cut and weld original handle for scope clearance. $225
Re-work bolt action to smooth operation From $150
Adjust trigger pull on most triggers From $150

Re-Barreling:
Furnish and Fit a Lothar Walther barrel From $650
Furnish and Fit a Krieger barrel From $750
(Price includes, barrel, installation, engraving of caliber and crowning. No bluing.)
*Ammunition to be invoiced by rounds fired or by the box

 

SHOTGUN WORK:

Strip, Clean and Oil $150
Open Chokes by dimension Per Barrel: $95
Open Chokes with Pattern Board* Per Barrel: $150
Lengthen Forcing Cones and / or Chambers Per Barrel: $75
Raise Dent and hone bore (Without bluing) From $100
Hone bore and polish to remove pits as best possible Per Barrel: From $75
Tighten action (Rebuild Underbite) From $225
New Hinge pin or hinge screw By Quotation
Adjust trigger pulls with range testing*. (Double trigger) From $300
Adjust trigger pull with range testing*. (Single trigger) From $300
Repair single triggers with range testing*. From $525
Make and Install new firing pins. From $75 per pin
Time ejectors From $225
Replace springs By Quotation
Install shotgun beads (Labor Only) From $40
Bend stock for cast or drop From $150
Stock Fitting (In Shop Only) $150
Stock Fitting with Live fire at pattern board * From $225
Furnish and Fit NECG Universal Recoil Pad $125
Furnish and Fit NECG Quick-Mount Pad (Sporting) $135
Add spacers to lengthen pull Additional From $100
Leather Covered Recoil Pad From $425
*Ammunition to be invoiced by rounds fired or by the box

STOCK WORK:

Stock repairs By Quotation
Stock Fitting (In Shop Only) $150
Stock Fitting with Live fire at pattern board * From $225
Furnish and Fit NECG Universal Recoil Pad $125
Furnish and Fit NECG Quick-Mount Pad (Sporting) $135
Add spacers to lengthen pull Additional From $100
Leather Covered Recoil Pad From $425
Shorten stock and checker butt From $225
Stock refinishing with Oil finish and re-cut checkering From $675
Bend stock for cast or drop From $150
Duplicate 1 rifle stock from customers prepared pattern From $225
Duplicate 1 rifle stock including pattern work From $500
Duplicate 1 rifle stock and inlet only From $1000
Install crossbolts in rifle stock (Labor Only) From :$150 per bolt
Inlet island type swivel (Dakota or Talley Labor Only)From:$150 per swivel

Scope mounting and Sight Installation


 

New England Custom Gun, Ltd.     741 Main Street     Claremont, NH 03743
Phone: (603) 287-4836     Fax: (603) 287-4832      E-Mail:
 info@necgltd.com

New England Custom Gun Service, Ltd. specializes in top quality gunmaking, gunsmithing and firearm restoration services to the sporting arms community, as well as high quality long arms, optics and gun components. Our shotgun line includes AyA shotguns, as well as drillings and combination guns from Germany by such makers as Merkel, and Krieghoff. Big bore guns, such as double rifles from Krieghoff, are available as well as bolt action rifles from these and other makers, including Prechtl, Blaser, Dakota, and Sauer. Although not extensive, our used guns list is definitely worth checking if you are in seach of the occasional gem. We also carry the rifle scopes of Schmidt & Bender, a high quality line of German hunting scopes that includes a complete series of Police Marksman long-range tactical sniper scopes. Both series are available with illuminated reticles. Our extensive gun components and gunsmithing tools list features a large assortment of scope mounts by EAW Recknagel, quality gun sights and gun accessories, including express sights by Recknagel, as well as our newly developed receiver sights, the NECG Peep Sight for Ruger Rifles, Weaver Bases, Grooved 22 and now the CZ Peep. You'll find a lot of knowledge at NECG. Please browse through all we have to offer. Then let us know how we can be of service!

NECG now imports RWS Ammunition from Germany in hard to find Metric ammunition as well as offering lead free bullet options in American calibers. NECG offers Ghost Ring Peep sights for the CZ 527 and CZ 550 and a RUGER Ghost Ring peep sight for Ruger firearms with integral scope bases. NECG is also a place to book your next African plains game hunt to the Eastern Cape of South Africa.